You're Going To Build A What?

The saga of J building his tiny off-grid house

Archive for the ‘Nic’ tag

Two steps forward, one step back!

without comments

Unexpectedly on Saturday morning I had a phone call from my little brother Nic to say he was free on Sunday and how about he came down to do the welding. Jumping at the chance to get the trailer finally finished I gave an enthusiastic ‘hell yes!’ and ran off to find a hire shop that had a suitable generator I could get on short notice. Fortunately it turns out there’s a very helpful rental place in Harrow who had a 5Kva unit available for the princely sum of £25 that I could collect before 5 and return Monday morning. Things were looking up.

Sunday morning came and I texted Nic to see how he was doing on the drive down from Sheffield. Time went by and eventually I rang at lunchtime to find a rather bleary Nic en-route but running a little late. Something to do with falling asleep at the kitchen table while drinking his morning tea, where he was found by a housemate some hours later still manfully holding his tea, dead to the world. Ah the joys of youthful carousing on a Saturday night :) .

Once he arrived we headed over to the house and set to work. First up was cutting out all the bits we no longer wanted, which is where two angle grinders come in very handy. Here you can see Nic working on the old, rusty and bent front section, along with the generator and the big welder.

02082009107

And a closer view of the front bar, you can just see the cuts through it and Nic finishing off the final cut with a hacksaw, as we couldn’t quite get the grinder into the gap.

02082009106

Now you can see just which bits were taken out, quite a lot removed.

02082009108

With that clear it was time to start welding the new pieces in.

02082009111

Shortly after that though, the welder started playing up. Not sure what’s wrong with it, just doesn’t seem to be creating the arc properly, it feeds wire, starts to spark and then just fades out. After poking and fiddling with it for a while we realised it wasn’t going to magically fix itself, despite the percussive maintenance we tried (i.e. hitting it) so we packed up for the day and went home.

The main front bar is on but not the extra pieces of the drawbar and supports.  Yesterday Pinky came over again and we finished grinding down the old support sections and tidying them up, plus painting all but the bits that don’t require welding, the silver sections are covered in weld-through primer to stop them going rusty where they’ve been ground down. I sat and drew up a slightly different front end configuration that will fit better and be stronger, though I need to pick up a couple more pieces of steel for it.

03082009113

So, progress, but I have to admit I’ve become quite fed up with the trailer now. I wish I’d spent the extra on a better second-hand unit in the first place. It’ll end up costing me the same, just taken months longer getting it all ready. Now, admittedly I’ll have learned a bunch of new things, but it’s putting a strain on the budget and the time. I want to have the roof and walls up by the end of September if there’s to be any hope of moving in before the winter arrives, which is my big hope. Next week I’ll be starting on the floor and wall framing, using the trailer as a construction base and then putting the panels aside until the welding’s finished. In the meantime I need to find someone who can service the welder without it costing me more than the thing’s worth.

Ho hum.

Peace, out.

Written by justin

August 4th, 2009 at 9:10 am

Two steps forward, one step back.

with 6 comments

It’s been a very busy couple of weeks here, but there’s less progress than I’d hoped there would be. Let’s start with the good news, my Ebay-fu is still rocking. The recent purchases are as follows:

Shower door: £10.50

I nipped up to oxford to collect this last week, only took 45 mins to get there and also allowed me to drop in on some friends who lived nearby for a quick cuppa and a chance to catch up. The door just needs a clean and the frame just needs the silicon sealant removing and it’ll be perfect.

Chimney Flue: £228

Now this comprises of 6 sections of double-walled, insulated, stainless-steel flue, plus the cap and a couple of 45degree bends. Each section is about a meter long and in the shops would cost around £100 each, so that’s £700-worth of flue. Found a courier company to pick them up from Kendal and bring them down to London for £30. Bargain. Just need a bit of a polish and they’ll be as good as new.

chimney-pipes

Kitchen Sink: £26

Another Ebay bargain, this is a Kohler sink, brand new, still in it’s box and which retails for £285. I was actually bidding on another, identical looking, sink but which in actual fact was smaller. That went beyond my set budget (£30) so I started bidding on, and ultimately won, this one. It wasn’t till I picked it up that I realised it was a chunk bigger, as the seller had used the same photo for both and just changed the size in the description. Still, although it’s a bit bigger than planned, it’s a really solid sink for an absolute steal and, in emergencies, I can use it as a bath.

kitchen-sink

Construction was planned for a bit of a boost this week as I took delivery of a mig welder to repair the trailer. Once again bought from Ebay for the bargain price of £136. It’s a bit rough around the edges and, when we plugged it in, it decided not to feed wire out. Opening it up and blasting away years of dust and assorted crud with the air blaster and winding off the first couple of layers of rusty wire soon had it running smoothly.

welder1

welder2

We spent a morning chasing around to find some gas for it, turns out you need an account with BOC to buy gas, as you have to rent the bottles from them and that’s about £60/year plus the cost of the gas. Found a place that does it’s own bottles and for £103 picked up a big bottle of Argoshield gas, got three years rental on the bottle included and can swap out for gas at £20 a fill for the next 3 years any time I want. Nice.

It’s a big beast of a welder and you can’t run it at full power off a 13A plug but it seemed to be fine at lower power so my brother Nicky sat me down and taught me the basics of welding. I had some offcuts of steel from the trailer sides that we’d removed so we cleaned a couple of those up and got stuck in. It’s fun, I’m going ot enjoy doing more of that and you can see my efforts below. Need some more practice, but I think they’ll hold things together.

first_welds

The next morning we were up bright and early to go and collect the steel pieces we’d ordered and then set up to cut out the bad sections and weld in the new. That’s when we discovered that the power was out to the garage where I’m running my extension from. There was no-one home to ask if we could check the breakers so that was that for the day. Nick had to leave at lunchtime so we decided to leave everything as it was. I’ve got plenty to be getting along with in the meantime such as practicing my welding, fixing some other bits of the trailer etc.I’m considering picking up a small generator off ebay (wherelse) so that I can guarantee having power in future.

We did measure everything out properly so that now I know exactly how big the house is going to be, where I’m running the framing out to and how wide I’m going to extend the house out to (just a little bit less than the wheel widths. I can now sit down and properly plan the framing. I may even start building some of the framing as individual panels, getting them nice and square and cladding them in OSB, this means I can effectively pre-fab them, store them and then put them up once the trailer’s done, it also means they’ll be straight, true and, hopefully, will go together quickly and without gaps.

Meanwhile, Nick has managed to sort a new job out this week and will be moving to Sheffield in a couple of week’s time. This means that instead of being in Ireland, he’s a couple of hours up the motorway and can come back down soon to oversee the cutting out of the trailer parts and do the main structural welding for me, something that makes me a lot happier about the longevity of my tiny house being towed around the place.

In hindsight, I should have bought a better, more expensive trailer. This has set back the building several weeks and added to the cost, something I could well do without. That said, I’m learning new skills and collecting new tools. I may sell the welder when it’s all finished to recoup some cost, or I may keep it and add it to my workshop. I said originally that this wasn’t about the end product, it wasn’t about building with the absolute minimum cost, it was much more about the ethos of building small, about learning new skills and the journey of actually building my own house. Some of these things are priceless, such as sitting with my brother and learning a new skill from him. I wouldn’t change a thing about what I’ve done so far.

Peace, out.

Written by justin

May 16th, 2009 at 1:33 pm