It’s been a very busy couple of weeks here, but there’s less progress than I’d hoped there would be. Let’s start with the good news, my Ebay-fu is still rocking. The recent purchases are as follows:
Shower door: £10.50
I nipped up to oxford to collect this last week, only took 45 mins to get there and also allowed me to drop in on some friends who lived nearby for a quick cuppa and a chance to catch up. The door just needs a clean and the frame just needs the silicon sealant removing and it’ll be perfect.
Chimney Flue: £228
Now this comprises of 6 sections of double-walled, insulated, stainless-steel flue, plus the cap and a couple of 45degree bends. Each section is about a meter long and in the shops would cost around £100 each, so that’s £700-worth of flue. Found a courier company to pick them up from Kendal and bring them down to London for £30. Bargain. Just need a bit of a polish and they’ll be as good as new.
Kitchen Sink: £26
Another Ebay bargain, this is a Kohler sink, brand new, still in it’s box and which retails for £285. I was actually bidding on another, identical looking, sink but which in actual fact was smaller. That went beyond my set budget (£30) so I started bidding on, and ultimately won, this one. It wasn’t till I picked it up that I realised it was a chunk bigger, as the seller had used the same photo for both and just changed the size in the description. Still, although it’s a bit bigger than planned, it’s a really solid sink for an absolute steal and, in emergencies, I can use it as a bath.
Construction was planned for a bit of a boost this week as I took delivery of a mig welder to repair the trailer. Once again bought from Ebay for the bargain price of £136. It’s a bit rough around the edges and, when we plugged it in, it decided not to feed wire out. Opening it up and blasting away years of dust and assorted crud with the air blaster and winding off the first couple of layers of rusty wire soon had it running smoothly.
We spent a morning chasing around to find some gas for it, turns out you need an account with BOC to buy gas, as you have to rent the bottles from them and that’s about £60/year plus the cost of the gas. Found a place that does it’s own bottles and for £103 picked up a big bottle of Argoshield gas, got three years rental on the bottle included and can swap out for gas at £20 a fill for the next 3 years any time I want. Nice.
It’s a big beast of a welder and you can’t run it at full power off a 13A plug but it seemed to be fine at lower power so my brother Nicky sat me down and taught me the basics of welding. I had some offcuts of steel from the trailer sides that we’d removed so we cleaned a couple of those up and got stuck in. It’s fun, I’m going ot enjoy doing more of that and you can see my efforts below. Need some more practice, but I think they’ll hold things together.
The next morning we were up bright and early to go and collect the steel pieces we’d ordered and then set up to cut out the bad sections and weld in the new. That’s when we discovered that the power was out to the garage where I’m running my extension from. There was no-one home to ask if we could check the breakers so that was that for the day. Nick had to leave at lunchtime so we decided to leave everything as it was. I’ve got plenty to be getting along with in the meantime such as practicing my welding, fixing some other bits of the trailer etc.I’m considering picking up a small generator off ebay (wherelse) so that I can guarantee having power in future.
We did measure everything out properly so that now I know exactly how big the house is going to be, where I’m running the framing out to and how wide I’m going to extend the house out to (just a little bit less than the wheel widths. I can now sit down and properly plan the framing. I may even start building some of the framing as individual panels, getting them nice and square and cladding them in OSB, this means I can effectively pre-fab them, store them and then put them up once the trailer’s done, it also means they’ll be straight, true and, hopefully, will go together quickly and without gaps.
Meanwhile, Nick has managed to sort a new job out this week and will be moving to Sheffield in a couple of week’s time. This means that instead of being in Ireland, he’s a couple of hours up the motorway and can come back down soon to oversee the cutting out of the trailer parts and do the main structural welding for me, something that makes me a lot happier about the longevity of my tiny house being towed around the place.
In hindsight, I should have bought a better, more expensive trailer. This has set back the building several weeks and added to the cost, something I could well do without. That said, I’m learning new skills and collecting new tools. I may sell the welder when it’s all finished to recoup some cost, or I may keep it and add it to my workshop. I said originally that this wasn’t about the end product, it wasn’t about building with the absolute minimum cost, it was much more about the ethos of building small, about learning new skills and the journey of actually building my own house. Some of these things are priceless, such as sitting with my brother and learning a new skill from him. I wouldn’t change a thing about what I’ve done so far.